1943 No.4 Mk1* Enfield Rifle
(Mfg under Lend Lease Act by Savage in 1943)

Serial number on barrel is 5349 then on bolt entrance that number. I have a lee Enfield no1 mark3. Lee–Enfield - Wikipedia, the free encyclopedia. Lee Enfield Serial Number Database The Number 4 Rifle had a peep sight at the rear of the receiver, and the barrel extends about 3 inches from the front of the forestock. Usually the information is on the left side of the butt socket and left side of the receiver. The bolt came from a Savage Lend Lease No4. You can make out the square S on it but the C in the serial number is the indicator that it came from the Chickopee Falls plant. Someone may have lost the original bolt due in part to the fact that you have a No4 Mk2 that was not a FTR. Factory Thorough Repair. Enfield No4 Mk2 Serial Numbers. Enfield Serial Numbers Lookup. Enfield No4 Mk1 Serial Numbers. Lee Enfield Serial Number List. Lee Enfield Serial Numbers Lookup. 303 British Rifle Serial Numbers. British Enfield Serial Number Lookup. Enfield 303 Serial Number Lookup. My Enfield is marked as follows: No. 4 Mk2 A12914 F 57 FTR I know that FTR stands for 'Factory Thorough Repair', that F stands for Fasakerley and that '57' indicates that it was FTR'ed in 1957. However, the serial number doesn't conform to Ian Skennertons serial number/ prefix/suffix for No.

(Click PIC to Enlarge)
Observations:
The rifle displayed in the photo pictorial is stamped U.S. Property, un-issued and all matching serial numbers, with all components and markings correct as on the day it left the factory.
Collector's Comments and Feedback:Over the past several months, Enfield Rifle Research has received dozens of questions about the spate of 'new' and 'rare' Lee-Enfields that have been showing up lately at gun shows and in pawn shops. Many of these are quite handsome rifles with pretty decent workmanship and are probably worth the $125 to $150 that the major firearms distributors ask for them. For the most part, though, they are not recently discovered “unissued” rifles, nor are they long-lost “prototypes” that have suddenly surfaced. The overwhelming majority of these “finds” are recently-made parts guns or replicas or recent aftermarket conversions of standard No. 1, 2A/2A1, or No. 4 rifles.

Navy Arms Company is making and selling a lot of these, and they usually describe them (albeit in the fine print) as 'replicas' or 'constructed of original No. 4 Enfields' or some such. SARCO and SOG (among others) are also marketing these (or similar) rifles for comparable prices, again with fair--or at least technically honest--advertising.

The problem arises when these aftermarket replicas pass through several hands and wind up offered for sale at a gun show or in a pawn shop. Typically, the advertising (such as it was) gets lost, the price gets jacked up, and the seller claims (maybe because he believes it) that the piece really is a long-lost treasure. A lot of people are getting burned by these knock-offs, and an even greater number are just plain confused.

Here’s our take on the various 'bargains' that have been showing up lately.

No. 1 Mk III* (Lithgow - 'New')
Often advertised as “collector grade”or “mint - unfired” or “unissued” andselling for $200 and up.

Watch out for these! Quite a few “new Lithgow” rifles have been built just within the last few years from spare parts bought from the Australian government. The parts are new, and the rifles were never issued--but they aren’t Lithgow factory rifles by any stretch of the imagination! They’re recently-built parts guns.

It is possible (though not likely) that some Lithgow-manufactured rifles with late-1945 (or later) dates were kept in storage and subsequently surplused out in unfired or unissued condition. Such rifles would have 5-digit serial numbers with either an “E” or an “F” serial number prefix, and the serial number would be stamped on the rear of the bolt handle and on the bottom of the fore-end, as well as on the receiver ring. Neither the nose cap nor the bottom of the backsight leaf will carry a different serial number on these rifles. Also, legitimate factory rifles will have 1/4-inch square brass or copper recoil plates installed on the fore-ends where the sear boss bears against the wood. These plates will be attached with small brass wood screws.

If you find a “new” Lithgow with a 1943 or 1944 date, be highly suspicious. This was the height of the war, and virtually all rifles manufactured were issued. If you find the receiver marked with a “JJ CO NY NY” import stamp, assume it’s a parts gun unless you have clear evidence to the contrary. (Many “new Lithgow” parts guns appear to have been assembled on receivers imported by John Jovino & Co.) If you find a 4-digit serial number with no prefix letter and an “A” suffix, this is clear evidence that it is not a Lithgow factory rifle. If you find different serial numbers on different parts, this is clear evidence that it is a parts gun. And if the recoil plates are missing, it is not only a parts gun--it could be dangerous to shoot. There’s a possibility that the fore-end will be damaged with as few as 20 or 30 round fired.

No. 1 'Tanker Carbine'
Overall length 39-40 inches; 20-21 inch barrel, with fore-endshortened and nose cap moved back. Also called “No. 1 Shortened and Lightened” rifle or “No. 6 Tanker Carbine” or “No. 6 Shortened and Lightened” rifle.

These are probably either aftermarket modifications or outright fakes. The Australian government did experiment with a shortened and lightened No. 1 rifle, but only a hundred prototypes were made. These have grooved fore-ends, lightening flutes on the barrel knox forms, and extensive lightening cuts on the receivers. Also, the Lithgow factory prototypes all have aperture backsights mounted on the charger bridge and solid handguards. All bear “XP” serial number prefixes.

Some unofficial experimenting was done by a number of unit armourers during WWII in an attempt to create a shortened and lightened version of the No. 1 rifle, and it is possible that a few of these early experiments have survived. The barrels were shortened, and the nose caps were reset, but most retained the barrel-mounted tangent sights. These are historically interesting, but they are not “official” Lithgow factory prototypes.

The easiest way to tell a recent replica from a WWII-vintage experimental model is to remove the nose cap. If you find freshly-cut wood, you know what you have! Also, many of the recent fakes have a hex-nut rather than a standard oblong nose cap nut securing the rear nose cap screw, and the fore-end stud and stud spring are missing.

No. 2A “Tanker” Carbine
Overall length 39-1/2 inches, with a 20-1/2 inch barrel. Fore-end shortened and nose cap moved back.

Advantages and disadvantages of technology. There ain’t no such thing! There never was. This is strictly an aftermarket modification. Such a shortened version of the Ishapore 2A/2A1 rifle was never even considered by the Indian government--never mind adopted--or by anyone else, for that matter.

No. 4 “Tanker” Carbine
Overall length 39-1/2 inches, with a 20-1/2 inch barrel. Fore-end shortened and nose cap moved back.

As above, there ain’t no such thing. Strictly an aftermarket modification.

No. 4 Shortened and Lightened
Overall length 39-42 inches; 20-23 inch barrel, withfore-end shortened and nose cap moved back.

Probably an aftermarket modification. The Canadian government did experiment with a shortened and lightened No. 4 rifle, and a few dozen prototypes were made; however, these have one-piece stocks! Also, the barrels and receivers were lightened with extensive milling. All were conversions of Long Branch rifles only.

If you see a two-piece stock or a receiver than doesn’t have any lightening cuts, you have an aftermarket modification or replica. The British version of the shortened and lightened No. 4 rifle is the No. 5 rifle (see below).

No. 4 “Collector Grade”
Savage or Long Branch, often advertised as “new”or “unissued.”

Watch out. It is possible that a legitimate unissued No. 4 rifle will turn up, but it’s not likely. Most of these “collector grade” rifles were arsenal reconditioned somewhere along the line--but somewhere other than Canada or Great Britain (who marked their reconditioned rifles “R” or “FTR”). Look for black enamel or flat black paint on the metal parts--this is a tip-off that the work was done in Pakistan or in South Africa or in some other country. Original No. 4 rifles have an oil-blackened finish (or possibly a blued finish on 1950 or later Long Branch rifles). Also, look for non-British or non-Canadian ownership or acceptance marks.

We have reports of a number of unissued Long Branch rifles re-imported into Canada from Belgium by Districorp. The story is that CAL sold a bunch of No. 4 rifles to the Belgian government in the early 1950s, and that they were kept in storage and never issued. These all have 95L serial numbers and 1950 dates and look quite nice. They are probably the real McCoy. (We’ll look into them further and report as soon as we have additional data.)

No. 5 “Jungle Carbine”
Overall length 39-1/2 inches; 20-1/2 inch barrel withflash hider. Rubber buttplate; short fore-end.

An honest No. 5 rifle (or “Jungle Carbine”) has lightening flutes cut in the barrel knox form and extensive milling done to the receiver to lighten it. (Take the handguard off and look for the barrel flutes.) Also, an honest No. 5 will be electro-engraved “No5MKI” on the left side of the receiver and will not have “No. 4” stamped or engraved anywhere on it. In addition, an honest No. 5 will bear the proper manufacturer’s code: “(ROF)F” for Fazakerley or “M47C” for BSA-Shirley. Finally, the barrel band will be only 8 inches in front of the receiver ring--rather than 10-3/4 inches as on a No. 4 rifle.

Enfield Serial Number Look Up

In the 1950s and 1960s, Golden State Arms Co. of Pasadena, California modified quite a few No. 4 rifles by shortening the barrels, adding flash hiders, and shortening the fore-ends. Some were equipped with Fajen or Bishop sporter stocks, as well. These were called various names, such as “No. 4 Jungle Carbine,” or “Santa Fe Mountain Carbine,” or “Mountain Rifle,” but all have “Golden State Arms” and “Santa Fe” roll-stamped on the barrel. Nice aftermarket conversions, but strictly that.

Currently, Navy Arms is doing the same thing with No. 4 rifles and selling them as “No. 5 Jungle Carbines.” At arm’s length they look genuine, but they have standard No. 4 rifle markings and DO NOT have the lightening flutes on the barrel or the lightening cuts on the receiver. These are strictly fakes--or thinly disguised “replicas.”

No. 6 “Jungle Carbine”
Overall length 39-1/2 inches, with 20-1/2 inch barrel andflash hider; brass buttplate.

The Australian No. 6 rifle was officially adopted, but only a couple of hundred prototypes were ever built. These have grooved fore-ends and handguards, and most have receiver-mounted aperture rear sights. All have “XP” serial number prefixes, and the bayonet lug on the flash hider is squared to accept a P1907-type bayonet rather than rounded to accept a No. 4-type bayonet. The handguard is the same length as the fore-end and will be solid for its full length or have an unusual set of backsight protectors on it--sort of like the rear handguard on an SMLE Mk I rifle.

Replicas and fakes abound. Golden State Arms made replicas in the 1950s and 1960s, but these are all marked “Golden State Arms” and “Santa Fe” on the barrel. In the 1970s, Federal Ordnance Company (Fed Ord) made some No. 6 look-alikes built on WWI-vintage Lithgow actions, but these are stamped “Jungle Rifle” on the left side of the receiver. Navy Arms is currently making look-alikes with no special marking and selling them as “No. 6 Jungle Carbines.” Don’t pay a premium for these!

Lee Enfield Serial Number Database Query

If you see a barrel-mounted tangent sight, the rifle is a fake. If you don’t see lightening flutes on the barrel knox form and lightening cuts in the receiver, the rifle is a fake. If it has a No. 5 flash hider, it’s a fake. If the barrel band is up within a few inches of the flash hider, it’s a fake. (Or a thinly-disguised “replica,” if you must.)

No. 7 “Jungle Carbine”
Shortened version of 2A/2A1 rifle, with flashhider installed.Like the 2A Tanker Carbine, this is strictly an aftermarket modification. There never was a carbine version of the Ishapore 2A/2A1 rifle, and there never was any such thing as a “No. 7 Jungle Carbine.” The Lee-Enfield No. 7 rifle is a .22 caliber training rifle, similar in appearance to a full-size No. 4 rifle, which was made in both Canada and Great Britain in the late 1940s. They are clearly marked as such.

A Final Word
We believe that Navy Arms and others are missing a bet by not labeling their products for what they are. Aftermarket modifications and replicas have been around since the days of Francis Bannerman, and they are an interesting part of the history of military rifles. Bannerman Krags are definitely collectable, and there is a growing interest in Golden State and Fed Ord Enfields--but mainly because they are readily identifiable for what they are.

The problem with the current crop is not just that the marketing borders on deceptive: ten or twenty years from now nobody will be able to tell an honest Navy Arms look-alike from the one-off handiwork of a basement wood butcher. We believe that the aftermarket modifications and even “replicas” would sell just as well if they were labeled as such, and we have no doubt that doing so would save a lot of grief for collectors--both now and in the years to come.

RETURN to Enfield Rifle Research main page.

RETURN to Alaska Enfield Headquarters main page.