Crack Isolation Membrane Home Depot

Posted on by

Crack isolation membranes provide the lowest profile (elevation or thickness) of the tile or stone tile installation incorporating a crack isolation membrane. A118.12 was developed to provide a standard with the minimum criteria necessary for a material to function as a deterrent to crack propagation from the substrate through the finished thin. ARDEX 8+9™ Rapid Waterproofing and Crack Isolation Compound is a best-in-class, two-component, solvent-free, cement-based membrane. Comprised of an acrylic-based liquid compound and a Portland and other hydraulic cement-based powder, ARDEX 8+9 can be applied easily with a paint roller or a brush to produce a highly flexible, waterproof coating.

The following information is to show the proper methods and materials for installation of tile, stone and other direct adhered materials onto suitable substrates for interior floor applications with an anti-fracture membrane.

ANSI A118.12 provides two levels of crack isolation, one for cracks less than 1/16', and one for higher performance with crack movement up to 1/8'. Membranes are available to isolate tiles from crack movement in the concrete slab up to 3/8'. There are many reasons for using a membrane in a ceramic or stone tile project. Merkrete Fracture Guard 7000 is the first liquid applied membrane to provide crack isolation up to 1/8'. It offers maximum protection for your tile and stone installation by inhibiting the transfer of cracks from the substrate to the ceramic, porcelain or stone tile. It is ultra-flexible with an elongation over 1000%. Membrane. In-plane crack isolation up to 1/8' (3 mm) over nonstructural cracks. MAPEI's Reinforcing Fabric is available but optional for use on coves, corners and field application. LIMITATIONS. Mapelastic AquaDefense is not for use over structural cracks, in-plane cracks beyond 1/8' (3 mm) or where vertical out-of-plane movement occurs.

Concrete - Crack Isolation Membrane - Partial Coverage
Concrete - Crack Isolation Membrane - Full Coverage

Recommended Products for Interior Floors with Crack Isolation Membrane

The following are among the recommended products for the installation of tile or stone using the crack isolation membrane method on interior floors (dry areas).

These products all qualify for the following warranties:

25 Year System Warranty

See Warranty

LATICRETE Lifetime System Warranty (United States and Canada)

See Warranty

Architectural Guidebook

Cracked tile is an eyesore and typically becomes the focal point of an otherwise flawless flooring application. LATICRETE® anti fracture products and kits offer unparalleled performance and ease of use on tile floors, whether you choose a peel and stick membrane, adhesive mortar or a liquid crack isolation membrane. Error installing apk on mac emulator. Anti-fracture product benefits include: easy installation, clean up with water, meets ANSI A118.12 and most are GREEENGUARD Certified, so you can breathe easy knowing that they meet appropriate indoor air quality standards for volatile organic compounds (VOCs).

Blue 92 Anti-Fracture Membrane
Blue 92 Anti-Fracture Membrane is a two–part system consisting of a liquid rubber and reinforcing fabric.
  • United States
  • Canada
Crack Suppression Kit

Crack Membrane For Tile

Redguard waterproofing website
Crack Suppression Kit consists of liquid rubber and reinforcing fabric packaged for convenient individual treatment of substrate cracks.
  • United States
  • Canada

Crack Isolation Membrane Home Depot Insulation

9235 Waterproofing Membrane

Gta 5 app. 9235 Waterproofing Membrane is an easy to install, thin, load-bearing waterproofing membrane designed specifically for the special requirements of ceramic tile, stone and brick installations. It’s a perfect solution for wet areas and continuous water submersion applications.

  • United States
  • Canada
FRACTURE BAN™

Crack Isolation Membrane Home Depot Home Depot

A high performance, pliable, light weight peel and stick membrane designed for use under thin-bed adhesives for ceramic tile, stone and other hard surface installations.
  • United States
  • Canada
170.3 Sound & Crack Isolation Mat
170.3 Sound & Crack Isolation Mat is a high performance acoustical underlayment system that muffles impact noises through ceramic tiles, stone and other hard surfacing materials.
  • United States
  • Canada
170.5 Sound & Crack Isolation Mat
170.5 Sound & Crack Isolation Mat is a high performance anti-fracture / sound and crack isolation membrane designed to be used under thin-bed adhesive for interior floor installations of ceramic tile, marble, stone and brick to reduce the transmission of impact noise and help provide soundproofing between floors and isolate cracks in the substrate.
  • Canada
  • United States
125 TRI MAX®

Three Products in One Thinset with Maximum Performance.
125 TRI MAX® provides incredible sound isolation protection while simultaneously protecting the tile or stone finish from any cracking by reducing the transmission of stresses in the substrate through to the tile or stone finish.

  • United States
  • Canada
FRACTURE BAN™ WP Tape
FRACTURE BAN™ WP Tape (Waterproofing Tape) is a 4' (10 CM) wide, 28 mil (0.7 mm) thick tape for waterproofing FRACTURE BAN peel and stick membranes.
  • United States
  • Canada
HYDRO BAN®
HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners.
  • United States
  • Canada
FRACTURE BAN™ SC
Prevent cracks from protruding up through your tile or stone installation with FRACTURE BAN SC. This a thin, load bearing, self-curing, liquid applied rubber polymer that can be easily applied in a single coat to form a flexible seamless anti-fracture membrane.
  • United States
  • Canada